



Managed
GigEthos Lite
Managed switch with 7 gigabit Ethernet ports and a serial console port for direct command-line configuration and monitoring
- Size
- 2.9″ × 2.0″
- 73.3 × 50.8 mm
- Weight
- 26 g
- Power
- 3.4 to 4.6 W
- 0 to 7 ports
- Input
- 4.5 to 42 V

Manufactured in the USA, in a facility that complies with the AS9100 Aerospace Management System
Overview
Need more ports and more control without giving up board space? The Managed GigEthos Lite builds on the GigEthos Lite, our compact OEM Ethernet switch for applications where Size, Weight, and Power (SWaP) are critical, and upgrades it with a managed Microchip switch core and two additional ports.
This small Ethernet switch has 7 ports, supports 10/100/1000 Mbps data rates, and adds managed switch features such as VLAN tagging, QoS traffic prioritization, and port mirroring. A dedicated 5-pin serial header (TX, RX, DTR, GND) gives you access for setup and configuration. Like the rest of the Ethos family, it uses simple Molex connectors in place of standard RJ45 jacks to save both board space and component weight.
Specs

- A7 gigabit Ethernet ports. Mating connector: Molex 0510210800
- BPower input, 4.5 to 42 VDC. Mating connector: Molex 0510210400
- CSerial console port, 5-pin header. Mating connector: Molex 0510210500
What's Included?
- Managed GigEthos Lite Ethernet Switch
- 7 Molex PicoBlade to RJ45 pigtails, gigabit (~12″)
- 1 Molex PicoBlade pigtail for power (12″)
| Ethernet | 7 ports, 10/100/1000 Mbps |
|---|---|
| Switch Type | Managed, Microchip switch core |
| Managed Switch Features | VLAN tagging, QoS traffic prioritization, and port mirroring |
| Serial Console | 5-pin serial header (pins 1 to 4: GND, DTR, RX, TX; pin 5 not connected) for direct command-line configuration and monitoring |
| Size | 2.885″ × 2.000″ × 0.328″ (73.3 × 50.8 × 8.3 mm) |
| Volume | 1.9 in³ |
| Weight | 26 g |
| Power Min/Max | 3.4 to 4.6 W (0 to 7 ports in use) |
| Voltage Input Range | 4.5 to 42 VDC |
| Mounting Holes | 4× ⌀0.089″, on a 2.685″ × 1.800″ pattern |
| Mating Connectors | Ethernet: Molex 0510210800. Power: Molex 0510210400. Console: Molex 0510210500 |
| Thermal | Main IC (KSZ9897RTXI) junction temperature must be limited to 125 °C. Junction to case: 1.5 °C/W. Junction to ambient: 11.3 °C/W |
| Operating Temperature | -40° to +60°C |
| Storage Temperature | -45° to +85°C |
| Connectors | Molex PicoBlade, for deeply integrated installation |
| Topology | Daisy-chain or star |
| Manufacturing | USA, in a facility that complies with the AS9100 Aerospace Management System |
| Part Number | ACS-ETH2-10 |
Heat sinking may be required in some applications with high load and inadequate air flow. The ACS-ETH2-10-ICD drawing shows the heat sink area.
Power Usage by Ports in Use
| Ports in use | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|---|
| Power (W) | 3.4 | 3.6 | 3.8 | 4.0 | 4.1 | 4.2 | 4.4 | 4.6 |
From the ICD drawing, ACS-ETH2-10-ICD Rev A




